The Ceramic Liner is compounded by rubberpolyurethane,alumina ceramic tilessteel backing

plate through hot vulcanizing process. Cushioning rubberurethane layer prevents ceramic tiles breakage

Advantages:

Abrasion-resistant;

Impact-resistant;

Noise reduction;

Available in irregular shapessizes;

When selecting wear liner, the following information should be taken into account:

-- Materiallump size,

--Drop hight,

--Impact angle

selection Method

1.ZE-TCM-I Type:

Used for moderate impactheavy wear applications.

Size of ceramic bricks: 100*150*25/50 mm

Size of ceramic rubber wear liner: 300*300*35/63mm

2  ZE-TCM-II Type:

Used for moderate to heavy abrasion and impact applications.

Size of Cylinder Ceramic : Φ20*20 Size of Wear Liner: 250*250*36mm Irregular size 

on special request.

3 ZE-TCM-III Type:

Used for heavy abrasion and impact applications. Size of Cylinder Ceramic:Φ31*31

Total thickness: 51mm

4  Others: Special shapes or sizes on request. We could make wear liners as customer’s 

drawing or samples.

Used for light abrasion applications and light impact or without impact. Spherical

 ceramic tiles are 

suitable for light impact.

Size of ceramic tiles:17.9 x 17.9 x 5mm, Size of Liner:250 x 250x 16mm.

square or rectangle ceramic bricks are also available, which is suitable for heavy 

abrasion applications.

Custom designed is available