| MODEL |
NO.15 |
N0.20 |
N0.25 |
N0.27 |
N0.35 |
N0.45 |
N0.55 |
N0.65 |
N0.75 |
BELT THICKNESS
(mm) |
3-4 |
4-5 |
5-6 |
6-7 |
7-8 |
8-9.5 |
9.5-11 |
11-12.5 |
12.5-16 |
BELT TENSION
(N/mm) |
11.4 |
16.6 |
17.5 |
21 |
26 |
28 |
30 |
35 |
45 |
MIN.PULLEY DIAMETER
(mm) |
65 |
75 |
100 |
130 |
180 |
230 |
300 |
360 |
400 |
Time-tested proven dependable, the strength of the lacing is enhanced due to the common bar, which yields a continuous lacing strip for the width of the belting. Thus, the tension is distributed across the entire belt width. Made of a special steel that allows the points to pierce the belt carcass, yet the teeth are design-ed to enter the belt fabric without cutting the longitudinal strength members of the belting.
Application requires a hammer gauge pin — no further tools are needed — to assure long life maximum reliability in light-weight belts.
Combining toughness with ease of installation, The Conveystar Belt Lacing makes a strong, smooth splice on all types of transmission light conveyor belts. |
